Description
18V X2 (36V) LXT® Lithium-Ion Brushless Cordless 9″ Power Cutter Kit, with AFT®, Electric Brake, 4 Batteries (5.0 Ah)
The Makita power cutter kit includes 36 Volt (18 Volt X2) LXT® brushless 9 Inch power cutter, four 18 Volt LXT® Lithium-Ion 5.0 Amp-hour battery, 18 Volt LXT® Lithium-Ion dual port charger, water hose coupling, 13 x 16 mm universal wrench, 36 grit 9 x .079 x 7/8 Inch INOX thin cut-off wheel, general-purpose 9 Inch segmented Diamond blade and a hex wrench. This power cutter delivers superior power to cut through various materials with all the benefits and convenience of cordless operation. This tool has a maximum cutting depth of 3-1/2 Inch, which enables tool to cut through standard residential concrete slab in a single pass. Cutter also cut through I-beams, 3 Inch steel pipe, 3/4 Inch -#6 rebar, 14 Inch wide metal stud and many more. Tool featured with an integrated water delivery system continuously feeds water for OSHA Table 1 Compliance in concrete cutting applications. This water flow can be controlled easily with an adjustment knob. The Active Feedback-sensing Technology (AFT®) turns the motor off, if rotation of the wheel is suddenly forced to stop. An electric brake stops the wheel in 4 seconds or less allowing for faster re-positioning. The Extreme Protection Technology (XPT™) is engineered to enhance a cutter operation in harsh conditions by channeling water and dust from key internal components. Tool featured with Star Protection Computer Controls™, allows the Star Protection-equipped tool and battery to exchange data in real time.
Features
Eliminates the hassles of gas with lower weight, reduced maintenance, and zero emissions allowing use in indoor environments
The BL™ Brushless Motor powered by two 18V LXT® Lithium-Ion batteries eliminate the hassle of engine pull starts allowing immediate starts-up
The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life; delivers 6,600 RPM
Integrated water delivery system with water flow adjustment knob continuously feeds water for OSHA Table 1 Compliance in concrete cutting applications
Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the wheel is suddenly forced to stop
Electric brake stops the wheel in 4 seconds or less allowing for faster re-positioning
Built-in L.E.D. light with an independent on/off switch illuminates the cutting area for increased visibility
Makes single pass cuts up to a 3-1/2″ depth in various masonry and metal materials
Integrated overload indicator alerts of excessive battery power draw during heavy loads
Soft start suppresses start-up reaction for smoother start-ups and longer gear life
Protective battery compartment helps prevent dust and slurry contamination
Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
Rubberized front handle can be held in multiple positions for increased comfort at various cutting orientations
Belt-drive design provides smoother operation with lower vibration
Lock-off power switch requires two actions to start power
Large spindle lock button for easier wheel changes while wearing gloves
Lower noise at 114 dB(A) and smoother operation for continuous use over longer periods
Weighs only 13.9 lbs. with batteries for reduced operator fatigue
Integrated battery charge light indicator allows user to monitor battery charge level for each of the two batteries
18V LXT® Lithium-Ion 5.0Ah battery BL1850B reaches a full charge in 45 minutes or less
18V LXT® Lithium-Ion 5.0Ah battery BL1850B, features an integrated L.E.D. battery charge level indicator
